Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Drive Axles, Bearings and Joints » Axle Shaft Assembly » Service Precautions » Service Notice Or Precautions  
 
 
  Service Notice Or Precautions  
 

PRECAUTIONS

Service Notice or Precautions

Observe the following precautions when disassembling and assembling drive shaft.

  • Joint sub-assembly does not disassemble because it is non-overhaul parts.
  • Perform work in a location which is as dust-free as possible.
  • Before disassembling and assembling, clean the outside of parts.
  • Prevention of the entry of foreign objects must be taken into account during disassembly of the service location.
  • Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean cover must be placed over parts.
  • Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adhering to parts.
  • Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by blowing with air or wiping with paper shop cloths.