G SENSOR

Removal and Installation

CAUTION:

• Do not drop or strike the yaw rate/side G sensor, because it has little endurance to impacts.
• Do not use power tools, because yaw rate/side G sensor is sensitive to impacts.
• For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.

REMOVAL

1. Remove the center console. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Exploded View.
2. Disconnect the yaw rate/side G sensor harness connector.
3. Remove the yaw rate/side G sensor nuts. Remove the yaw rate/side G sensor.

INSTALLATION
Installation is in the reverse order of removal.

• For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.
• Arrow Indicates Front of vehicle.