Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Brakes and Traction Control » Disc Brake System » Brake Caliper » Service and Repair » Front Disc Brake » Inspection After Disassembly  
 
 
  Inspection After Disassembly  
 

FRONT DISC BRAKE

BRAKE CALIPER ASSEMBLY : Inspection After Disassembly

CALIPER
Check the inner wall of caliper for corrosion, wear, and damage. Replace as necessary.

CAUTION:
Clean the caliper using new brake fluid. Never use mineral oils such as gasoline or kerosene.

TORQUE MEMBER
Check torque member for wear, cracks, and damage. Replace as necessary.

PISTON
Check the piston surface for corrosion, wear, and damage. Replace as necessary.

CAUTION:
The piston sliding surface is plated. Do not polish with sandpaper.

SLIDING PIN, SLIDING PIN BOOT, SLIDING PIN BOLT
Check the sliding pin, sliding pin bolt, and sliding pin boot for wear, damage, and cracks. Replace as necessary.