KEY SLOT
Diagnosis Procedure
1.CHECK KEY SLOT POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect key slot connector.
- Check voltage between slot connector and ground.
Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace key slot power supply circuit.
2.CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace key slot ground circuit.
3.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|
