Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Body and Frame » Doors, Hood and Trunk » Trunk / Liftgate Interior Trim Panel » Service and Repair » Removal And Installation » Sedan  
 
 
  Sedan  
 

TRUNK ROOM TRIM and TRUNK LID FINISHER

Removal and Installation

REMOVAL

TRUNK ROOM TRIM

  1. Release the latch, then position rear seatback (RH/LH) to the folded down position.
  2. Release the clips, then remove trunk floor carpet.
  3. Remove trunk net rear and trunk net side (if installed).
  4. Release the clips, then remove trunk rear finisher.
  5. Release the clips, then remove trunk side finisher (RH/LH).
  6. Remove spare tire cover and trunk floor board (LH).
  7. Remove the trunk lid rubber bumper (RH/LH), then release the clips and remove trunk lid finisher.

INSTALLATION
Installation is in the reverse order of removal.