Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Instrument Panel, Gauges and Warning Indicators » Testing and Inspection » Scan Tool Testing and Procedures » Diagnosis Description  
 
 
  Diagnosis Description  
 

DIAGNOSIS SYSTEM (METER)

Diagnosis Description

SELF-DIAGNOSIS MODE

  • Odo/trip meter and information display segment operation can be checked in self-diagnosis mode.
  • Meters/gauges can be checked in self-diagnosis mode.

OPERATION PROCEDURE

  1. Turn the ignition switch OFF.
  2. While pushing the odo/trip meter switch, turn the ignition switch ON again.
  3. Push the odo/trip meter switch at least 3 times within 7 seconds after the ignition switch is turned ON.
  4. The unified meter control unit is turned to self-diagnosis mode.

  

  • All the segments on the odo/trip meter illuminate.
  • Dots in all segments of information display LCD (1) flash alternately.

  

NOTE:
If any of the segments are not displayed, replace the combination meter. Refer to See: Instrument Cluster / Carrier\Service and Repair\Removal and Replacement.

  1. Push the odo/trip meter switch. Each meter/gauge should indicate as shown in the figure.