Description
BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON.
Turn ignition switch ON under the following conditions.
CVT selector lever is in the P or N position
Do not depress the brake pedal
Check "Self diagnostic result" with CONSULT-III. Is DTC detected?
YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.
Diagnosis Procedure 1.PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Re-register all Intelligent Keys.
For initialization and registration of Intelligent Key. Refer to CONSULT-III Operation Manual.
Can the system be initialized and can the engine be started with re-registered Intelligent Key?
YES >> ID was unregistered.
NO >> BCM is malfunctioning.