Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Computers and Control Systems » Testing and Inspection » Component Tests and General Diagnostics » Electrical Load Signal » Component Function Check  
 
 
  Component Function Check  
 

ELECTRICAL LOAD SIGNAL

Component Function Check

1.CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

  1. Turn ignition switch ON.
  2. Connect CONSULT-III and select "DATA MONITOR" mode.
  3. Select "LOAD SIGNAL" and check indication under the following conditions.

  

Is the Inspection result normal?
YES >> GO TO 2.
NO >> Go to See: Diagnosis Procedure.
2.CHECK LIGHTING SWITCH FUNCTION
Check "LOAD SIGNAL" indication under the following conditions.

  

Is the Inspection result normal?
YES >> GO TO 3.
NO >> Go to See: Diagnosis Procedure.
3.CHECK HEATER FAN CONTROL SWITCH FUNCTION
Select "HEATER FAN SW" and check indication under the following conditions.

  

Is the Inspection result normal?
YES >> Inspection END
NO >> Go to See: Diagnosis Procedure.