Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Computers and Control Systems » Information Bus » Testing and Inspection » Component Tests and General Diagnostics » AV Branch Line Circuit » CAN  
 
 
  CAN  
 

AV BRANCH LINE CIRCUIT

Diagnosis Procedure

Inspection PROCEDURE
1.CHECK CONNECTOR

  1. Turn the ignition switch OFF.
  2. Disconnect the battery cable from the negative terminal.
  3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side). Is the Inspection result normal?

YES >> GO TO 2.
NO >> Repair the terminal and connector.
2.CHECK HARNESS FOR OPEN CIRCUIT

  1. Disconnect the connector of AV control unit.
  2. Check the resistance between the AV control unit harness connector terminals.

  

Is the measurement value within the specification?
YES >> GO TO 3.
NO >> Repair the AV control unit branch line.
3.CHECK POWER SUPPLY AND GROUND CIRCUIT
Check the power supply and the ground circuit of the AV control unit. Refer to See: Accessories and Optional Equipment\Entertainment Systems\Testing and Inspection\Component Tests and General Diagnostics\Power Supply And Ground Circuit (Coupe).
Is the Inspection result normal?
YES (Present error)>>Replace the AV control unit. Refer to See: Accessories and Optional Equipment\Radio/Stereo\Service and Repair\Audio Unit\Bose Audio With Navigation.
YES (Past error)>>Error was detected in the AV control unit branch line.
NO >> Repair the power supply and the ground circuit.