CONTROL DEVICE

Removal and Installation

REMOVAL

1. Remove the center console assembly. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Disassembly And Assembly.
2. Disconnect the control cable from the control device assembly.
3. Disconnect the CVT device harness connector from the control device assembly.
4. Remove the control device assembly bolts and the control device assembly.

INSTALLATION
Installation is in the reverse order of removal.

• When installing the control cable to the control device assembly, make sure that the control cable is fully pressed in with the ribbed surface facing upward.
• After installation is completed, adjust and check CVT position. Refer to See: Adjustments\CVT RE0F09B.