Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Continuously Variable Transmission/Transaxle » Testing and Inspection » Scan Tool Testing and Procedures » CVT RE0F10A » CONSULT-III Function (Transmission)  
 
 
  CONSULT-III Function (Transmission)  
 

DIAGNOSIS SYSTEM (TCM)

CONSULT-III Function (TRANSMISSION)

CONSULT-III can display each diagnostic item using the diagnostic test modes shown below.

FUNCTION

  

WORK SUPPORT MODE

Display Item List

  

Engine Brake Adjustment

  

CAUTION:
Mode of "+1""0""-1""-2""OFF" can be selected by pressing the "UP""DOWN" on CONSULT-III screen.
However, do not select mode other than "0" and "OFF". If the "+1" or "-1" or "­2" is selected, that might cause the irregular driveability.

Check CVT Fluid Deterioration Date

  

CAUTION:
Touch "CLEAR" after changing CVT fluid, and then erase "CVTF DETERIORATION DATE".

SELF-DIAGNOSTIC RESULT MODE
After performing self-diagnosis, place check marks for results on the See: Initial Inspection and Diagnostic Overview\CVT RE0F10A\Diagnosis And Repair Work Flow\Diagnostic Work Sheet. References are provided following the items.

Display Items List
Refer to See: A L L Diagnostic Trouble Codes ( DTC )\Testing and Inspection.

DATA MONITOR MODE

Display Items List