Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Brakes and Traction Control » Antilock Brakes / Traction Control Systems » Service Precautions » Vehicle Damage Warnings » VDC/TCS/ABS » Precaution For Brake Control  
 
 
  Precaution For Brake Control  
 

PRECAUTIONS

Precaution for Brake Control

  • Just after starting vehicle after ignition switch ON, brake pedal may vibrate or motor operating noise may be heard from engine compartment. This is normal condition.
  • When an error is indicated by ABS or another warning lamp, collect all necessary information from customer (what symptoms are present under what conditions) and check for simple causes before starting diagnostic servicing. Besides electrical system Inspection, check brake booster operation, brake fluid level, and oil leaks.
  • If tire size and type are used in an improper combination, or brake pads are not Genuine NISSAN parts, stopping distance or steering stability may deteriorate.
  • ABS might be out of order or malfunctions by putting a radio (wiring inclusive), an antenna and a lead-in wire near the control unit.
  • If aftermarket parts (car stereo, CD player, etc.) have been installed, check for incidents such as harness pinches, open circuits, and improper wiring.
  • VDC system may not operate normally or a VDC OFF indicator lamp or SLIP indicator lamp may light.
  • When replacing the following parts with parts other than genuine parts or making modifications: Suspension related parts (shock absorber, spring, bushing, etc.), tires, wheels (other than specified sizes), brake-related parts (pad, rotor, caliper, etc.), engine-related parts (muffler, ECM, etc.) and body reinforcement-related parts (roll bar, tower bar, etc.).
  • When driving with worn or deteriorated suspension, tires and brake-related parts.