Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Starting and Charging » Power and Ground Distribution » Description and Operation » Power Distribution System » System Description  
 
 
  System Description  
 

POWER DISTRIBUTION SYSTEM

System Description

INPUT/OUTPUT SIGNAL CHART

  

SYSTEM DESCRIPTION

  • PDS (POWER DISTRIBUTION SYSTEM) is the system that BCM controls with the operation of the pushbutton ignition switch and performs the power distribution to each power circuit. This system is used instead of the mechanical power supply changing mechanism with the operation of the conventional key cylinder.
  • The push-button ignition switch can be operated when Intelligent Key is in the following condition. Refer to Engine Start Function for details.
  • Intelligent Key is in the detection area of the interior antenna
  • Insert Intelligent Key in to the key slot
  • The push-button ignition switch operation is input to BCM as a signal. BCM changes the power supply position according to the status and operates the following relays to supply power to each power circuit.
  • Ignition relay (inside IPDM E/R)
  • Ignition relay (inside fuse block)
  • ACC relay
  • Blower fan relay

NOTE:
The engine switch operation changes due to the conditions of brake pedal, CVT selector lever and vehicle speed.

  • The power supply position can be confirmed with the lighting of the indicators near the push-button ignition switch.

PUSH-BUTTON IGNITION SWITCH OPERATION PROCEDURE
The power supply position changing operation can be performed with the following operation.

NOTE:

  • When an Intelligent Key is within the detection area of inside key antenna and when it is inserted in to the key slot, it is equivalent to the operations below.
  • When starting the engine, the BCM monitors under the engine start conditions,
  • Brake pedal operating condition (CVT models)
  • CVT selector lever position (CVT models)
  • Clutch pedal operating condition (M/T models)
  • Vehicle speed
  • Unless each start condition is fulfilled, the engine will not respond regardless of how many times the engine switch is pressed. At that time, illumination repeats the position in the order of LOCK to ACC to ON to OFF.