Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Steering and Suspension » Wheels and Tires » Wheels » Testing and Inspection  
 
 
  Testing and Inspection  
 

ROAD WHEEL

Inspection

ALUMINUM WHEEL

  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    1. Remove tire from aluminum wheel and mount on a tire balance machine.

  

    1. Set dial indicator as shown in the figure.

Wheel runout (Dial indicator value): Refer to See: Specifications.

STEEL WHEEL

  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout.
    1. Remove tire from steel wheel and mount on a tire balance machine.

  

    1. Set two dial indicators as shown in the figure.
    2. Set each dial indicator to 0.
    3. Rotate wheel and check dial indicators at several points around the circumference of the wheel.
    4. Calculate runout at each point as shown below.

  

    1. Select maximum positive runout value and the maximum negative value.

Add the two values to determine total runout.
In case a positive or negative value is not available, use the maximum value (negative or positive) for total runout.
If the total runout value exceeds the limit, replace steel wheel.

Wheel runout : Refer to See: Specifications.