Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Accessories and Optional Equipment » Keyless Entry » Testing and Inspection » Component Tests and General Diagnostics » Remote Keyless Entry Receiver » Diagnosis Procedure » Coupe  
 
 
  Coupe  
 

REMOTE KEYLESS ENTRY RECEIVER

Description

Receives Intelligent Key operation and transmits to BCM.

REMOTE KEYLESS ENTRY RECEIVER

Diagnosis Procedure

1.CHECK REMOTE KEYLESS ENTRY RECEIVER OUTPUT SIGNAL

  1. Turn ignition switch OFF.

  

  1. Check signal between remote keyless entry receiver connector and ground with oscilloscope.

  

Is the Inspection result normal?
YES >> GO TO 7
NO >> GO TO 2
2.CHECK REMOTE KEYLESS ENTRY RECEIVER POWER SUPPLY

  1. Disconnect remote keyless entry receiver connector.

  

  1. Check signal between remote keyless entry receiver connector and ground with oscilloscope.

  

Is the Inspection result normal?
YES >> GO TO 4
NO >> GO TO 3
3.CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 1

  1. Disconnect BCM connector.

  

  1. Check continuity between BCM connector and remote keyless entry receiver connector.

  

  1. Check continuity between BCM connector and ground.

  

Is the Inspection result normal?
YES >> Reconnect BCM, GO TO 4
NO >> Repair or replace harness between BCM and remote keyless entry receiver.
4.CHECK REMOTE KEYLESS ENTRY RECEIVER GROUND CIRCUIT

  

Check continuity between remote keyless entry receiver connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 6
NO >> GO TO 5
5.CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 2

  

Check continuity between BCM connector and remote keyless entry receiver connector.

  

Is the Inspection result normal?
YES >> GO TO 7
NO >> Repair or replace harness between BCM and remote keyless entry receiver.
6.CHECK REMOTE KEYLESS ENTRY RECEIVER CIRCUIT 3

  

  1. Check continuity between BCM connector and remote keyless entry receiver connector.

  

  1. Check continuity between BCM connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 7
NO >> Repair or replace harness between BCM and remote keyless entry.
7.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.