PASSENGER SIDE : Diagnosis Procedure (With LH and RH Anti-Pinch)
1.CHECK POWER WINDOW SWITCH OUTPUT SIGNAL
Read voltage signal between BCM connector and ground with oscilloscope when door lock and unlock switch (passenger side) is turned to "LOCK" or "UNLOCK".
Check that signals which are shown in the figure below can be detected during 10 second just after door lock and unlock switch (passenger side) is turned "LOCK" or "UNLOCK".
Is the Inspection result normal?
YES >> GO TO 4
NO >> GO TO 2 2.CHECK POWER WINDOW SWITCH GROUND
Turn ignition switch OFF.
Disconnect power window and door lock/unlock switch RH connector.
Check continuity between front power window switch (passenger side) connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness. 3.CHECK POWER WINDOW SERIAL LINK CIRCUIT