DOOR LOCK AND UNLOCK SWITCH
PASSENGER SIDE : Description
Transmits door lock/unlock operation to BCM.
DOOR LOCK AND UNLOCK SWITCH
PASSENGER SIDE : Diagnosis Procedure (With LH Anti-Pinch Only)
1.CHECK POWER WINDOW SWITCH OUTPUT SIGNAL
- Turn ignition switch ON.
- Check voltage at the power window and door lock/unlock switch RH connector when the switch (passenger side) is turned to "LOCK" or "UNLOCK".
Is the Inspection result normal?
YES >> GO TO 5
NO >> GO TO 2
2.CHECK POWER WINDOW SWITCH GROUND
- Turn ignition switch OFF.
- Disconnect power window and door lock/unlock switch RH connector.
- Check continuity between power window and door lock/unlock switch RH connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3.CHECK POWER WINDOW SWITCH
Check continuity between power window and door lock/unlock switch RH terminals.
Is the Inspection result normal?
YES >> GO TO 4
NO >> Replace power window and door lock/unlock switch RH.
4.CHECK POWER WINDOW SWITCH CIRCUITS
- Disconnect BCM connector.
- Check continuity between BCM connector and power window and door lock/unlock switch RH connector.
- Check continuity between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 5
NO >> Repair or replace harness.
5.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|
