DOOR LOCK ACTUATOR
DRIVER SIDE : Description
Locks/unlocks the door with the signal from BCM.
DOOR LOCK ACTUATOR
DRIVER SIDE : Diagnosis Procedure
1.CHECK OUTPUT SIGNAL
Check voltage between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> GO TO 2
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
- Turn ignition switch OFF.
- Disconnect BCM and door lock actuator driver side connector.
- Check continuity between BCM connector and door lock actuator driver side connector.
- Check continuity between BCM connector and ground.
Is the Inspection result normal?
YES >> Replace door lock actuator LH.
NO >> Repair or replace harness.
3.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|