DOOR LOCK ACTUATOR
REAR RH : Description
Locks/unlocks the door with the signal from BCM.
DOOR LOCK ACTUATOR
REAR RH : Diagnosis Procedure
1.CHECK DOOR LOCK ACTUATOR SIGNAL
Check voltage between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> GO TO 2
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
- Disconnect BCM and rear door lock actuator RH connectors.
- Check continuity between BCM connector and rear door lock actuator RH connectors.
- Check continuity between BCM connector and ground.
Is the Inspection result normal?
YES >> Replace rear door lock actuator RH.
NO >> Repair or replace harness.
3.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|
