Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Body and Frame » Seats » Service Precautions » Technician Safety Information » Sedan  
 
 
  Sedan  
 

PRECAUTIONS

Precaution for Work

  • When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth.
  • When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component with a shop cloth or vinyl tape to protect it.
  • Protect the removed parts with a shop cloth and keep them.
  • Replace a deformed or damaged clip.
  • If a part is specified as a non-reusable part, always replace it with new one.
  • Be sure to tighten bolts and nuts securely to the specified torque.
  • After re-installation is completed, be sure to check that each part works normally.
  • Follow the steps below to clean components.
  • Water soluble foul: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the fouled area. Then rub with a soft and dry cloth.
  • Oily foul: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe the fouled area. Then dip a cloth into fresh water, and wring the water out of the cloth to wipe the detergent off. Then rub with a soft and dry cloth.
  • Do not use organic solvent such as thinner, benzene, alcohol, and gasoline.
  • For genuine leather seats, use a genuine leather seat cleaner.