WASHER LEVEL SWITCH SIGNAL CIRCUIT
Description
Transmits the washer level switch signal to the combination meter.
WASHER LEVEL SWITCH SIGNAL CIRCUIT
Diagnosis Procedure
1.CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect combination meter connector and washer level switch connector.
- Check continuity between combination meter harness connector M24 (A) terminal 29 and washer level switch harness connector
E208 (B) terminal 1.
29 - 1 : Continuity should exist.
- Check continuity between combination meter harness connector M24 (A) terminal 29 and ground.
29 - Ground : Continuity should not exist.
Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair harness or connector.
2.CHECK WASHER LEVEL SWITCH GROUND CIRCUIT
Check continuity between washer fluid level switch harness connector E208 terminal 2 and ground.
2 - Ground : Continuity should exist.
Is the Inspection result normal?
YES >> Inspection End.
NO >> Repair harness or connector.
|
