Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Instrument Panel, Gauges and Warning Indicators » Testing and Inspection » Component Tests and General Diagnostics » Power Supply And Ground Circuit » Combination Meter  
 
 
  Combination Meter  
 

POWER SUPPLY AND GROUND CIRCUIT

COMBINATION METER : Diagnosis Procedure

1.CHECK FUSES
Check for blown combination meter fuses.

  

Is the Inspection result normal?
YES >> GO TO 2
NO >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
2.POWER SUPPLY CIRCUIT CHECK

  

  1. Disconnect combination meter connector.
  2. Check voltage between combination meter harness connector M24 terminals 1, 2, 14 and ground.

  

Is the Inspection result normal?
YES >> GO TO 3
NO >> Check harness for open between combination meter and fuse.
3.GROUND CIRCUIT CHECK

  

  1. Turn ignition switch OFF.
  2. Check continuity between combination meter harness connector terminals 3, 4, 23 and ground.

  

Is the Inspection result normal?
YES >> Inspection End.
NO >> Check ground harness.