Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Lighting and Horns » Headlamp » Service and Repair » Disassembly And Assembly  
 
 
  Disassembly And Assembly  
 

HEADLAMP

Disassembly and Assembly

COMBINATION LAMP - XENON TYPE

  

Disassembly

CAUTION:

  • Do not touch the glass of the bulb directly by hand. Keep grease and other oily substances away from bulb. Do not touch bulb while it is lit or right after being turned off, burning may result.
  1. Remove the plastic cover, disconnect the xenon bulb connector, unlock the retaining spring to remove the xenon bulb.
  2. Turn the halogen bulb (high beam) lamp socket counterclockwise to unlock and remove it.
  3. Turn the front turn signal lamp bulb socket counterclockwise to unlock and remove it.
  4. Pull the front turn signal lamp bulb from its socket.
  5. Turn the park/side marker lamp bulb socket counterclockwise to unlock and remove it.
  6. Pull the park/side marker lamp bulb from its socket.

Assembly
Assembly is in the reverse order of disassembly.

CAUTION:

  • After installing the xenon bulb, be sure to install plastic cover securely to ensure watertightness.

COMBINATION LAMP - HALOGEN

  

Disassembly

CAUTION:

  • Do not touch the glass of the bulb directly by hand. Keep grease and other oily substances away from bulb. Do not touch bulb while it is lit or right after being turned off, burning may result.
  1. Turn the halogen lamp bulb (low beam) counterclockwise to unlock and remove it.
  2. Turn the halogen lamp bulb (high beam) socket counterclockwise to unlock and remove it.
  3. Turn the front turn signal lamp bulb socket counterclockwise to unlock and remove it.
  4. Pull the front turn signal lamp bulb from its socket.
  5. Turn the park/side marker lamp bulb socket counterclockwise to unlock and remove it.
  6. Pull the park/side marker lamp bulb from its socket.

Assembly
Assembly is in the reverse order of disassembly.