Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Windows and Glass » Quarter Window Glass » Service and Repair » Removal  
 
 
  Removal  
 

GLASS STATIONARY

REPLACEMENT OF MOLDED TYPE SIDE WINDOW : Removal

  

1.Apply protective tape (A) on body side outer panel around side window glass to protect painted surface from damage.

  

2.Insert a windshield cutter (A) between side window glass and body side outer panel . Remove adhesive by pulling the windshield cutter, keeping the tip parallel to the edge of side window glass.

CAUTION:
Use piano wire to cut sealant if its difficult to use windshield cutter.
3.Remove the adhesive using a piano wire.
a.Pass the piano wire from passenger room to bonded area of side window glass using a wire pierce.

CAUTION:
Never damage surrounding parts.

  

b.Tie both ends of the piano wire (B) to wire grip (A), etc..
c.Remove adhesive by using piano wire alongside of side window glass and body side outer panel.

CAUTION:
Remove adhesive, 2 workers are required by all means.
NOTE:
Power cutting tool and an inflatable pump bag can also be used.

  

4.Remove side window glass.