Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Windows and Glass » Windows » Testing and Inspection » Component Tests and General Diagnostics » Power Supply And Ground Circuit » Rear Power Window Switch » Diagnosis Procedure » LH Only Anti-Pinch-Sedan  
 
 
  LH Only Anti-Pinch-Sedan  
 

POWER SUPPLY AND GROUND CIRCUIT

REAR POWER WINDOW SWITCH : Description

POWER SUPPLY AND GROUND CIRCUIT

REAR POWER WINDOW SWITCH : Diagnosis Procedure

Rear Power Window Switch Power Supply Circuit Check

  1. CHECK POWER SUPPLY CIRCUIT
  1. Turn ignition switch ON.

  

  1. Check voltage between rear power window switch connector and ground.

  

Is the measurement value within the specification?
YES >> GO TO 2 (Rear power window switch LH)
YES >> GO TO 3 (Rear power window switch RH)
NO >> GO TO 4

  1. CHECK HARNESS CONTINUITY (REAR POWER WINDOW SWITCH LH)

  

  1. Turn ignition switch OFF.
  2. Disconnect main power window and door lock/unlock switch and rear power window switch LH.
  3. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch LH connector (B).

  

  1. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

  

Is the Inspection result normal?
YES >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
NO >> Repair or replace harness.

  1. CHECK HARNESS CONTINUITY (REAR POWER WINDOW SWITCH RH)

  

  1. Turn ignition switch OFF.
  2. Disconnect main power window and door lock/unlock switch and rear power window switch RH.
  3. Check continuity between main power window and door lock/unlock switch connector (A) and rear power window switch RH connector (B).

  

  1. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

  

Is the Inspection result normal?
YES >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
NO >> Repair or replace harness.

  1. CHECK HARNESS CONTINUITY

  

  1. Disconnect BCM and rear power window switch.
  2. Check continuity between BCM connector (A) and rear power window switch connector (B).

  

  1. Check continuity between BCM connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 5
NO >> Repair or replace harness.

  1. CHECK REAR POWER WINDOW SWITCH Check rear power window switch. Refer to See: Component Inspection\LH Only Anti-Pinch-Sedan.

Is the Inspection result normal?
YES >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
NO >> Replace rear power window switch. Refer to See: Power Window Switch\Service and Repair\LH Only Anti-Pinch-Sedan.