POWER WINDOW MOTOR
REAR LH : Description
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window switch LH.
POWER WINDOW MOTOR
REAR LH : Diagnosis Procedure
Power Window Motor Circuit Check
- CHECK REAR POWER WINDOW SWITCH OUTPUT SIGNAL
- Disconnect rear power window motor LH connector.
- Turn ignition switch ON.
- Check voltage between rear power window motor LH connector and ground.
Is the measurement value within the specification?
YES >> GO TO 2
NO >> Check rear power window switch LH. Refer to See: Power Supply And Ground Circuit\Rear Power Window Switch\Component Inspection\LH & RH Front Anti-Pinch-Sedan.
- CHECK HARNESS CONTINUITY
- Turn ignition switch OFF.
- Disconnect rear power window switch LH.
- Check continuity between rear power window switch LH connector (A) and rear power window motor LH connector (B).
- Check continuity between rear power window switch LH connector (A) and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
- CHECK REAR POWER WINDOW MOTOR LH Check rear power window motor LH. Refer to See: Component Inspection\LH & RH Front Anti-Pinch-Sedan.
Is the Inspection result normal?
YES >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
NO >> Replace rear power window motor LH. Refer to See: Rear Door Window Glass\Service and Repair\Removal and Replacement\Rear Window Glass.
|