Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Relays and Modules » Relays and Modules - Powertrain Management » Technical Service Bulletins » All Technical Service Bulletins » Engine Controls - Blank ECM Programming Procedure » Verify VIN Is Registered  
 
 
  Verify VIN Is Registered  
 

  

1. Select Diagnosis (One System) > ENGINE > Work support > VIN Registration (see Figure 22a).

2. Select Start.

  

3. Check the VIN (see Figure 23a):

^ If the VIN matches the vehicle, the procedure is complete

^ If the VIN is blank or incorrect, continue to the next step.

4. Enter the vehicle's VIN in both the boxes: VIN(1ST TIME) and VIN (2ND TIME)

5. Select Start

  

6. When VIN registration is compete, COMMAND SUCCEEDED will display (see Figure 24a).

7. Turn the ignition OFF.

8. Wait 10 seconds.

9. Turn the ignition back ON.

10. Select "READ VIN" and confirm that the VIN is correct.

NOTE :

If the VIN does not display, it can also be checked by selecting the "RE/programming, Configuration" on the Home screen.

11. Select Home and return to the C-III plus home screen.

12. Close C-III plus.

13. Turn the ignition OFF.

14. Disconnect the plus VI from the vehicle.

15. Test drive the vehicle to make sure it operates correctly.