Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Sensors and Switches » Sensors and Switches - Brakes and Traction Control » Yaw Rate Sensor » Service and Repair  
 
 
  Service and Repair  
 

G SENSOR

Removal and Installation

CAUTION:

  • Do not drop or strike the yaw rate/side G sensor, because it has little endurance to impacts.
  • Do not use power tools, because yaw rate/side G sensor is sensitive to impacts.
  • For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.

REMOVAL

  1. Remove the center console. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Exploded View.
  2. Disconnect the yaw rate/side G sensor harness connector.
  3. Remove the yaw rate/side G sensor nuts. Remove the yaw rate/side G sensor.

INSTALLATION
Installation is in the reverse order of removal.

  

  • For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.
  • Arrow Indicates Front of vehicle.