Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » B Code Charts » B26E1 » Sedan With Intelligent Key  
 
 
  Sedan With Intelligent Key  
 

B26E1 NO RECEPTION OF ENGINE STATUS SIGNAL

Description
BCM receives the engine status signal from ECM via CAN communication.

DTC Logic

DTC DETECTION LOGIC

NOTE:

  

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE

  1. Turn ignition switch ON under the following conditions.
    • CVT selector lever is in the P or N position.
    • Do not depress the brake pedal.
  1. Check "Self diagnostic result" with CONSULT-III. Is DTC detected?

YES >> Refer to "Diagnosis Procedure".
NO >> Inspection End.

Diagnosis Procedure
1.Inspection START

  1. Turn ignition switch ON.
  2. Check "Self diagnostic result" with CONSULT-III.
  3. Touch "ERASE".
  4. Perform DTC Confirmation Procedure. See "DTC Logic".

Is the DTC B26E1 displayed again?
YES >> GO TO 2
NO >> Inspection End.
2.REPLACE ECM

  1. Replace ECM.
  2. Refer to See: Powertrain Management\Computers and Control Systems\Testing and Inspection\Programming and Relearning\Basic Inspection (VQ35DE), , "BASIC (QR25DE California). >> Inspection End.