Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » B Code Charts » B2607 » Coupe  
 
 
  Coupe  
 

B2607 STEERING LOCK RELAY

Description
BCM requests to IPDM E/R to supply power to electronic steering column lock. IPDM E/R sends status of steering lock unit back to BCM.

DTC Logic

DTC DETECTION LOGIC

NOTE:

  

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE

  1. Press the push-button ignition switch under the following conditions.
    • CVT selector lever is in the P position
    • Do not depress brake pedal
  1. Steering lock is locked.
  2. Check "Self diagnostic result" with CONSULT-III. Is DTC detected?

YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.

Diagnosis Procedure
1.CHECK DTC WITH IPDM E/R
Check "Self diagnostic result" with CONSULT-III. Refer to See: Testing and Inspection.
Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace malfunctioning parts.
2.CHECK ELECTRONIC STEERING COLUMN LOCK POWER SUPPLY CIRCUIT

  1. Turn ignition switch OFF.
  2. Disconnect electronic steering column lock harness connector.

  

  1. Check voltage between electronic steering column lock and ground under the following conditions.

  

Is the Inspection result normal?
YES >> GO TO 4
NO >> GO TO 3
3.CHECK ELECTRONIC STEERING COLUMN LOCK POWER SUPPLY CIRCUIT

  1. Turn ignition switch OFF.
  2. Disconnect IPDM E/R harness connector.

  

  1. Check continuity between electronic steering column lock and IPDM E/R harness connector.

  

  1. Check continuity between electronic steering column lock and ground.

  

Is the Inspection result normal?
YES >> Replace IPDM E/R. Refer to See: Power and Ground Distribution\Power Distribution Module\Service and Repair.
NO >> Repair harness or connector.
4.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.