Step 6: Recheck for DTC
Upon completion of the Drive Pattern, determine if any DTCs have been stored. Only in rare cases will this occur.
| ^ |
If a DTC has been stored after completing the Drive Pattern, it must be repaired. Refer to ASIST for diagnostic and repair information.
|
NOTE: Normal warranty coverage will apply for DTC repairs.
| ^ |
Once the DTC is repaired, erase the stored DTC. Turn the ignition OFF for 10 seconds, and then repeat the entire Drive Pattern (Step 5) to "COMPLETE" the SRTs.
|
| ^ |
If no DTCs have been stored, DO NOT touch "Erase" or all SRT items will reset to "INCOMPLETE."
|
|
