| 1. |
Select Diagnosis (One System) > ENGINE > Work support > VIN Registration (see Figure 22a).
|
| 2. |
Select Start.
|
| 3. |
Check the VIN (see Figure 23a):
| ^ |
If the VIN matches the vehicle, the procedure is complete
|
| ^ |
If the VIN is blank or incorrect, continue to the next step.
|
|
| 4. |
Enter the vehicle's VIN in both the boxes: VIN(1ST TIME) and VIN (2ND TIME)
|
| 5. |
Select Start
|
| 6. |
When VIN registration is compete, COMMAND SUCCEEDED will display (see Figure 24a).
|
| 7. |
Turn the ignition OFF.
|
| 8. |
Wait 10 seconds.
|
| 9. |
Turn the ignition back ON.
|
| 10. |
Select "READ VIN" and confirm that the VIN is correct.
NOTE :
If the VIN does not display, it can also be checked by selecting the "RE/programming, Configuration" on the Home screen.
|
| 11. |
Select Home and return to the C-III plus home screen.
|
| 12. |
Close C-III plus.
|
| 13. |
Turn the ignition OFF.
|
| 14. |
Disconnect the plus VI from the vehicle.
|
| 15. |
Test drive the vehicle to make sure it operates correctly.
|
|
