HIGH-PRESSURE PIPE

Removal and Installation for Junction Pipe

REMOVAL

1. Discharge the refrigerant. Refer to See: Service and Repair\Refrigeration System.
2. Remove the front grille. Refer to See: Body and Frame\Grille\Service and Repair\Coupe.
3. Remove the junction pipe. Refer to See: Description and Operation\Refrigeration System\Component.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:

• Replace the O-ring of the junction pipe with a new one, then apply compressor oil to it when installing it.
• After charging the refrigerant, check for leaks. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Checking Of Refrigerant Leaks.