PRE-Inspection FOR DIAGNOSTIC
Vehicle Security Operation Check
1.Inspection START
Turn ignition switch "OFF" and pull out Intelligent Key from key slot.
NOTE:
Before starting operation check, open front windows.
>> GO TO 2
2.CHECK SECURITY INDICATOR LAMP
- Lock doors using Intelligent Key or mechanical key.
- Check that security indicator lamp illuminates for 30 seconds. Security indicator lamp should illuminate.
OK >> GO TO 3
NG >> Perform diagnosis and repair. Refer to See: Component Tests and General Diagnostics\Vehicle Security Indicator\Component Function Check\Coupe.
3.CHECK ALARM FUNCTION
- After 30 seconds, security indicator lamp will start to blink.
- Open any door or hood before unlocking with Intelligent Key or mechanical key, or open trunk lid without Intelligent Key or mechanical key.
Do alarm function properly.
OK >> GO TO 4
NG >> Check the following.
Unlock any door or open trunk lid using Intelligent Key or mechanical key.
Alarm (horn, headlamp and hazard lamp) should stop.
OK >> Inspection End.
NG >> Check door lock function. Refer to See: Body and Frame\Locks\Power Locks\Description and Operation\Door Lock Function\Intelligent Key\System Description\Coupe.
|