Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Body and Frame » Doors, Hood and Trunk » Rear Door » Service and Repair » Sedan With Intelligent Key  
 
 
  Sedan With Intelligent Key  
 

DOOR

BACK DOOR : Removal and Installation

CAUTION:

  • When removing and installing the rear door assembly, support the door with a jack and cloth to protect the door and body.
  • When removing and installing rear door assembly, be sure to carry out the fitting adjustment.
  • Check the hinge rotating parts for poor lubrication. If necessary, apply "body grease".
  • After installing, apply touch-up paint (the body color) onto the head of the hinge nuts.
  • Operate with two workers, because of its heavy weight.
  • Check rear door open/close operation after installation.

REMOVAL

  1. Pull out grommet and disconnect rear door harness connector.
  2. Remove the check link bolt from the center pillar.
  3. Remove the door-side hinge nuts (a) and the door assembly (1).

  

INSTALLATION
Installation is in the reverse order of removal.