Setting of Limit Switch
If any of the following work has been done, set the limit switch (integrated in the motor).
- Removal and installation of the regulator.
- Removal and installation of the motor from the regulator.
- Removal and installation of the door glass.
- Removal and installation of the glass run.
Resetting of Limit Switch
After installing each component, perform the following procedure to reset the limit switch.
- Raise the door glass to the top position.
- While pressing and holding the reset switch, lower the door glass to the bottom position.
- Release the reset switch. Verify that the reset switch returns to the original position, and then raise the door glass to the top position.
CAUTION: Do not operate the door glass automatically to raise the glass to the top position.
|