Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Maintenance » Fluids » Engine Oil » Service and Repair  
 
 
  Service and Repair  
 

ENGINE OIL

Changing Engine Oil

WARNING:

  • Be careful not to burn yourself, as the engine oil may be hot.
  • Prolonged and repeated contact with used engine oil may cause skin cancer; try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
  1. Position the vehicle so it is level on the hoist.
  2. Warm up the engine and check for oil leaks from the engine.
  3. Stop engine and wait for 10 minutes.
  4. Remove the oil pan drain plug and oil filler cap.
  5. Drain the engine oil.
  6. Install the oil pan drain plug with a new washer and refill the engine with new engine oil.

  

CAUTION:

  • Be sure to clean the oil pan drain plug and install with a new washer.
  • The refill capacity depends on the oil temperature and drain time. Use these specifications for reference only. Always use the dipstick to determine when the proper amount of oil is in the engine.
  1. Warm up the engine and check around the oil pan drain plug and oil filter for oil leaks.
  2. Stop engine and wait for 10 minutes.
  3. Check the engine oil level using the dipstick.

CAUTION:
Do not overfill the engine oil.