B210B STARTER CONTROL RELAY
Description
Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position and the steering is locked or unlocked. It is installed in parallel with the starter relay.
DTC Logic
DTC DETECTION LOGIC
NOTE:
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
Turn the power supply position to start under the following conditions and wait for at least 1 second.
CVT selector lever is in the P or N position.
Depress the brake pedal
Check "Self diagnostic result" with CONSULT-III. Is DTC detected? YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.
Diagnosis Procedure
1.Inspection START
Turn ignition switch ON.
Check "Self diagnostic result" with CONSULT-III.
Touch "ERASE".
Perform DTC Confirmation Procedure. See See: Testing and Inspection . Is the DTC B210B displayed again?
YES >> Replace IPDM E/R. Refer to See: Power and Ground Distribution\Power Distribution Module\Service and Repair .
NO >> Inspection End.