PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED ON
Description
The parking, license plate and tail lamps do not turn ON in with any lighting switch setting.
PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED ON
Diagnosis Procedure
1.COMBINATION SWITCH Inspection
Check the combination switch. Refer to See: Body and Frame\Body Control Systems\Description and Operation\Combination Switch Reading System\System Description.
Is the combination switch normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning part.
2.CHECK TAIL LAMP RELAY REQUEST SIGNAL INPUT
CONSULT-III DATA MONITOR
- Select "TAIL and CLR REQ" of IPDM E/R DATA MONITOR item.
- With operating the lighting switch, check the monitor status.
Is the item status normal?
YES >> GO TO 3
NO >> Replace BCM. Refer to See: Body and Frame\Body Control Systems\Body Control Module\Service and Repair.
3.PARK LAMP CIRCUIT Inspection
Check the parking lamp circuit. Refer to See: Component Tests and General Diagnostics\Parking Lamp Circuit\Diagnosis Procedure.
Is the tail lamp circuit normal?
YES >> Replace IPDM E/R. Refer to See: Power and Ground Distribution\Power Distribution Module\Service and Repair.
NO >> Repair or replace the malfunctioning part.
|
