ASCD BRAKE SWITCH
Component Inspection (ASCD Clutch Switch)
1.CHECK ASCD CLUTCH SWITCH-I
- Turn ignition switch OFF.
- Disconnect ASCD clutch switch harness connector.
- Check harness continuity between ASCD clutch switch terminals under the following conditions.
Is the Inspection result normal?
YES >> Inspection END
NO >> GO TO 2.
2.CHECK ASCD CLUTCH SWITCH-II
- Adjust ASCD clutch switch installation. Refer to .
- Check harness continuity between ASCD clutch switch terminals under the following conditions.
Is the Inspection result normal?
YES >> Inspection END
NO >> Replace ASCD clutch switch.
|
