DIAGNOSIS AND REPAIR WORK FLOW

Work Flow

DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
>> GO TO 2
2.CHECK SYMPTOM

• Check the symptom based on the information obtained from the customer.
• Check to see if any other malfunctions are present. >> GO TO 3

3.CHECK CONSULT-III SELF-DIAGNOSIS RESULTS
Connect CONSULT-III and perform "SELF-DIAGNOSIS". Refer to See: Testing and Inspection\Scan Tool Testing and Procedures\Diagnosis Description See: Testing and Inspection\Scan Tool Testing and Procedures\CONSULT-III Function, "CONSULT-III Function (METER/M&A)".
Are self-diagnosis results normal?
YES >> GO TO 4
NO >> Repair or replace the malfunctioning parts, GO TO 5
4.NARROW DOWN MALFUNCTIONING PARTS THROUGH SYMPTOM DIAGNOSIS
Perform symptom diagnosis and repair or replace the identified malfunctioning parts.
>> GO TO 5
5.FINAL CHECK
Check that the warning buzzer in the combination meter operates normally.
Does it operate normally?
YES >> Inspection End.
NO >> GO TO 1